MSDS WEBPAGE
SAFETY DATA SHEET - THRIVING DESIGN STAKE CAPS
701-78
Revision Date: 12/07/1
SECTION 1 IDENTIFICATION OF MANUFACTURER AND PRODUCT
Sinclair & Rush, Inc.
123 Manufacturers Drive
Arnold, MO 63010
636-282-6800
Product Identification: 701-78
Description: Plastisol
Intended Use: Flexible PVC is used for durable goods , construction and industrial applications . Restrictions exist that limit use in children's toys or childcare articles that can be placed in the mouth.
See Section 15 and check relevant regulations.
24 –Hour Emergency #: 1-800-424-9300 (CHEMTREC)
SECTION 2 HAZARDS IDENTIFICATION
This material is not hazardous according to regulatory guidelines (see Section 15).
Other hazard information:
HAZARD NOT OTHERWISE CLASSIFIED (HNOC): None as defined under 29 CFR 1900.1200.
PHYSICAL / CHEMICAL HAZARDS
Material can accumulate static charges which may cause an ignition
HEALTH HAZARDS
Excessive exposure may result in eye, skin, or respiratory irritation.
ENVIRONMENTAL HAZARDS
No significant hazards
NFPA Hazard ID: Health: 0 Flammability: 1 Reactivity : 0
HMIS Hazard ID: Health: 1 Flammability: 1 Reactivity: 0
NOTE: This material should not be used for any other purpose than the intended use in Section 1 without expert advice. Health studies have shown that chemical exposure may cause potential human health risks which may vary from person to person .
SECTION 3 COMPOSITION / INFORMATION ON INGREDIENTS
Hazardous Substance(s) or Complex Substance(s) required for disclosure
Name CAS# Concentration GHS Hazard Codes
diisononyl phthalate 28553-12-0 >1% none
Synonyms: 1,2-Benzenedicarboxylic acid, diisononyl ester
SECTION 4 FIRST AID PROCEDURES
Inhalation: Remove to fresh air. Seek medical attention if necessary.
Ingestion: Seek medical advice.
Skin Contact: Wash thoroughly with soap and water.
Eye Contact: Rinse eyes with water for at least 15 minutes. Seek medical attention if .
necessary.
SECTION 5 FIRE FIGHTING MEASURES
Extinguishing Media: CO2, foam, dry chemical, water spray.
Special Fire Fighting Procedures: Self-contained breathing apparatus should be worn to avoid inhalation of smoke.
Unusual Fire and Explosion Hazards: Hydrogen chloride may be generated upon combustion of material.
Extreme heat can cause pressure buildup in closed containers, which may lead to rupture or explosion.
Flash Point: N/A
Flammable Limits: N/A
SECTION 6 ACCIDENTAL RELEASE NEASURES
PROTECTIVE MEASURES
Avoid contact with spilled material. See Section 5 for fire fighting information. See the Hazard Identification Section for Significant Hazards. See Section 4 for First Aid Advice . See Section 8 for advice on the minimum requirements for personal protective equipment. Additional protective measures may be necessary , depend ing on the specific circumstances and/or the expert judgment of the emergency responders
Spill or Leak Procedures: Contain the spill – do not allow discharge into the sewer system. Soak up the spill using an inert absorbent material such as sawdust, and scoop the absorbed material into a container for disposal.
SECTION 7 HANDLING AND STORAGE
Handling and Storage: Store in a cool dry place; provide adequate ventilation during processing
General Hygiene: Observe good industrial hygiene and safety practices. Wash hands with soap and water before breaks and at the end of the day.
SECTION 8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering Measures: Ventilation is required in processing areas to prevent inhalation of fumes from heated material.
Personal Protection: Protective gloves and safety glasses are recommended to prevent skin and eye contact.
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
Appearance : Liquid Upper/lower flammability or explosive limits: N/A
Odor; mild Vapor pressure: N/A
Odor threshold: N/A Vapor density: N/A
pH: N/A Relative density: N/A
Melting point/freezing point: N/A Solubility(ies): N/A
Initial boiling point and boiling range: N/A Partition coefficient: n-octanol/water: N/A
Flash point: N/A Auto ignition temperature: N/A
Evaporation rate: N/A Decomposition temperature:: N/A
Flammability (solid, gas): N/A Viscosity: 1500-3000 cps
SECTION 10 STABILITY AND REACTIVITY
Stability: Material is stable under normal conditions
Hazardous Polymerization: Will not occur.
Hazardous Decomposition: Elevated temperatures may produce hydrogen chloride, carbon monoxide, and carbon dioxide.
Conditions to Avoid: Open flames or prolonged exposure to temperatures above 300° F will cause thermal decomposition.
Materials to avoid: Strong oxidizer
SECTION 11 TOXICOLOGICAL INFORMATION
|
|
|||||
Routes of Entry:
Inhalation: Fumes emitted during the fusion process can cause respiratory tract irritation.
Ingestion: May be harmful if swallowed.
Skin Contact: May cause skin irritation.
Eye Contact: May cause eye irritation.
The following ingredients are cited on the lists below: None.
--REGULATORY LISTS SEARCHED--
1 = NTP CARC
2 = NTP SUS
3 = IARC 1 5 = IARC 28
4 = IARC 2A 6 = OSHA CARC
SECTION 12 ECOLOGICAL INFORMATION
Not determined
SECTION 13 DISPOSAL CONSIDERATIONS
Dispose of in accordance with federal, state and local regulations
SECTION 14 TRANSPORT INFORMATION
N/D
SECTION 15 REGULATORY INFORMATION
This product does not contain any toxic chemicals subject to the reporting requirements of Section 313 of Title III, or of 40 CFR Part 372
OSHA HAZARD COMMUNICATION STANDARD: This material is not considered hazardous in accordance with OSHA HazCom 2012 , 29 CFR 1910.1200.
EPCRA SECTION 302: This material contains no extremely hazardous substances .
Additiona l information :
Restrictions exist that limit use of this product in children's toys or childcare articles that can be placed in the mouth;
- check relevant regulations.
SECTION 16 OTHER INFORMATION
This warning is given to comply with California Health and Safety Code 25249.6 and does not constitute an admission or a waiver of rights. This product contains a chemical known to the State of California to cause cancer .
This information is furnished without warranty, express or implied – it is the responsibility of the user to determine the suitability and completeness of such information and recommendations for its own particular use. Vendor shall not be responsible for any direct, incidental, or consequential damages of whatsoever nature resulting from the publication of, use of, or reliance upon such information and recommendations.