C-BITE Maker Kit - Expand Existing Plant Supports

These are like an erector set. You can make just about any sort of garden trellis with them.The poles are sturdy and seem like they will hold up well.There are many clips included to configure the poles in just about any way you wish, as long as your needs require they are always perpendicular to each other. So no geodesic dome type trellis' with this.The clips seem a bit on the weak side, and may not hold up well, but some wire around the joints would be ideal anyway, and they seem adequate for the job.Would buy again. Makes it easy to make a trellis.

The media could not be loaded.

While the materials all seem to be made well and of good quality, I found this plant support system to be more of a hassle and difficult to use vs others that just connect with a slide in connector. These connectors can be a bit difficult to put on, take off and to connect to one another which is accomplished by slipping it into the receiving notch. (not easily).It does have the advantage of creating a more customized support system vs others but again, for me, it's just not worth the hassle. I would suggest wearing gloves when putting these together or taking them apart.I did try them on some other similar stakes I purchased elsewhere and they do fit the same.I can't speak to how well the connectors hold up being exposed to UV and other outdoor elements over time yet.

These stakes are sturdy and useful for 1 tomato plant. It was a lot of snaping the clips on and it needed fingers muscle to do this. I have weak fingers so it was tough for me needing to snap so many clips. I didn't understand why 40 clips when this set only have 8 short stakes.

My tomato garden was out of control and this support system kit was the solution. I was able to create a 30 inch by 30 inch support fence that was approximately 24 inches tall (vertical bars are ~6 inches into the ground). I only needed to use 12 of the clips and have 28 remaining for future use. Unfortunately, all of the support bars that came in the kit were used but additional support bars can easily be purchased if expansion is needed.The clips were easy to snap onto the bars and connecting the clips together was quick and effortless. The support fence is very sturdy and supports my plants as advertised. Overall, this is an affordable, quick, and easy solution for plant and garden support. I'm very happy with this item and would highly recommend it.

The plant sticks are very thick and sturdy. It comes with a lot of clips so that you can build almost any design that you want. It would be better if it came with something to stake into the soil as it isn't heavy enough to withstand strong winds on top of the ground, but overall I really like it!

This plant support kit came in handy for my cucumber plants. It came with 8 stakes and around 40 clips. I was able to create a structure to help trellis them as they were falling over and tangling with each other. The clips were difficult to put on and adjust. It was unfortunately easier if you knew how you wanted to create your structure before you started. There were a couple of choice words said while trying to put this together, comparing to where I needed it to be most effective and finding a way to get the most use out of the lack of abundant stakes. Overall, this was very useful for my garden and the plants are already looking better with some extra support, it just would be great to have a higher number of stakes relative to the number of clips.

The media could not be loaded.

We ordered this plant support set for use with the nylon trellis netting that we have a roll of. The set comes with support stakes as well as clips that feature a clamp perfectly molded to the stakes (simply pop them on) as well as hooks to attach various add-ons such as trellis netting or other stakes. The clips have little connections as shown in the video I included to be attached to each other. It's almost like a Lego kit, but for building your own plant support systems, which is awesome! I love how many possibilities this plant support set opens up.I can see this set being useful not just for your plants, but also anywhere in the yard or even other applications. The materials that the items are made with are relatively standard for plastic plant support steaks, so they seem like they'll stand up to an acceptable amount of wear and tear outside in the garden. I'd say it's a pretty good value for your money.

Ok so, I've been on the review list for tons of different trellising items this garden season and this is the first one I've seen thats meant to extend or alter your existing structures. I think it's a niche that deserves filling.These poles do match the three different brands of trellis I've ordered with the same green plastic coated metal poles. I find that most of the connectors are unstable but these ones impressed me in this kit and are actually better than the verticle connectors I have.I'm hoping they release new sets and DIY kits that allow for customizing your trellis as the plant grows instead of forcing the plant to go to the trellis.Pictured is my jungle that believe it or not is trellised inside.

The c-clamps that attach top the poles are tight! I don’t have super strong grip strength but I managed to assemble a frame with a little trial and error, following the visual instructions for making corners. It helped a lot for me to use the hard surface of my table top to push against, to snap the c-clamps onto the poles. I chose to make a square tomato cage. I do see myself buying additional components of this kit in the future to expand my cages as needed.Once in the ground the frame is fairly sturdy. What excites me most about this kit is it will break down for tidy storage. The kit also included many more clips than I needed. This will insure that I can continue to use the poles year after year, even if I lose or break some clips.

This plant support system is strong and easy to use, very versatile for whatever kind of support you're looking for. I'm using it to support peach branches on the lower branches that are laden with fruit. Works like a charm. Good value

The C-Bite plant support maker kit came in very handy in my garden.I already have a similar kit but the stakes from C-Bite are a lot longer. They are sturdy and do not bend so they are perfect to hold up my 6 corn plants that were mishandled by a raccoon one night. That said, the connectors are versatile but building a cage requires a lot of stakes and some time so I used cross brackets from my existing system for now.Also, I wish the C-Bite system would come with extenders to make the stakes longer. I am using extenders from a different system I already had and they work perfectly together.I know that the c-clamps make this kit different compared to the kits I already own . They are very versatile and you can build all kinds of structures. For my purposes I found that there are a lot of clamps in the box but not as many stakes to truly build what I need on the fly so I had to improvise.But overall I really love the story behind the product and saw that there are different stakes and kits available so I will buy some more stakes and get to building.The quality is great and I love that you can adapt to your needs on the fly and build around the plants as they grow.

I have a cucumber plant that has taken off beyond the cage that I originally gave it. I needed to find something that was much larger, so this was a good option because I was able to customize the shape and size so it would fit around the plant that was already unruly. It works well, except it would be nice if it could be customized to grow taller as well.These poles are very sturdy and well made. I expect these poles to last for many years. There are little connectors that snap into place. No tools are needed. The best thing about this product is that it can be used for plants that are already in the middle of their growing season. Regular plant cages need to beput into place while the plant is still young, and then they often overgrow it.

There are so many possibilities with this trellis/ plant support system!Right out of the package I noticed how sturdy the poles are, they seem like they will be able to handle a good amount of weight. The clips are a bit confusing without instruction- but I was able to figure out how to link them together. It is a little tricky to push the clips on to the rod but once they are on they feel very well connected.Overall this is a very interesting and customizable system for plant support.

A resolute no from me. The c-bites do grip strongly, but were very hard to use and by the time I was done even making one support my fingers were bloodied and bruised. Maybe it's just me, but these require too much effort and frustration and there are other products out there that work similarly without this much hassle.I intended to use these to help me create a protection over my plants for when winter comes. The package comes with loads of c-bites and a few stakes. You're supposed to use these in conjunction with your own bamboo or similar type stakes. I'm no seasoned gardener and I have few plants. For me the effort is not worth the pain.

These stakes are sturdy and work well for supporting short plants. The pole design is similar to the tall trellis poles I purchased from another vendor, so the connectors are compatible with those as well. Attaching the clips takes some finger strength. They snap on tightly and can be a bit tricky to remove or connect, as they require slipping into a small notch that doesn’t always cooperate easily.The set includes only 8 poles, which is probably enough for just two plants. I’d recommend purchasing taller poles separately and using these clips to create a continuous trellis row that can support multiple plants more efficiently.

It took me a bit, but when I finally got it, I had a relatively easy time putting these together to make a crude trellis. There are only two different parts: the stems and the clasper things. I found I couldn't get the clasp on with just my hands... I had to get leverage from a hard surface and push down onto it to get it to snap into place. The more mystifying part was how to connect the poles together with the clasps. Once I got that, everything went pretty smoothly. It's nice to have something adjustable, movable and changeable in case your needs change along the way.

These sticks are solid! Each one has a few clips that go with it and snap on fairly easily to keep the plant upright. It definitely beats the plain bamboo sticks that start to break down over a few months. I like that I can keep it in the pot with the plant to come back next year so I can use it again and again.

This is a clever little set that allows you to build a customized plant support system. My veggie garden is currently a jungle and I plan to use this for tomato and cucumber support. I already own additional green stakes that are compatible with the C-Bites, and if I have enough I'll also use the C-Bites for dahlia support!Pros:- Sturdy- So many ways to build a support system- Fun! Like playing with Legos- Green color blends with the garden- Easy once you get the hang of it- Environmentally friendly; can use over and over instead of using products you throw away at the end of each seasonCould be better:- Can be tough to get the clips onto the stake at first, but as you get the hang of it, it gets easier- A little complicated to understand at first; it would be a good idea to put a QR code on the paper instructions and link to some videos showing step-by-step instructions for common support systemsGreat product! Great idea! I'm a fan.

This was a pretty smart invention by whoever created this... There are SO many possibilities here for building plant cages and supports. Very versatile and ingenious! One criticism on my part is i wish you could somehow change or customize the lengths--or even somehow cut part of them off---as you're just stuck with that exact sizing. But other than that, I think these are great! Some of the reviews I read where people said they hurt their fingers putting this together sounds a bit dramatic... Personally, I had to push the support brackets into each other a little firmly, but if you know how to put them together properly, it really wasnt that difficult or painful. For now, I'm using this to prop up my monstera plant that is growing WILD and used to be flopping all over the ground... I would imagine this would be FANTASTIC to use out in garden boxes outdoors to build supports for veggies and larger plant bushes as well! Heck, you could use solely the plant stakes and even at this price it's still a pretty good deal for just those!

I've tried other trellis support brands mostly for tomatoes and dahlia that failed to deliver because the poles weren't sturdy enough without putting at least a foot deep into the ground or a planter.This product is superior -- the poles are incredibly solid which means I only need about 6 inches in the ground either standalone, or in a trellis configuration and I still get the height I need.The price is very fair and especially for the quality. I found the assembled parts were all I needed.Definitely recommend for the garden or even indoor plants (I use two connected poles for my monstera plant).

These are tough sturdy poles and clamps. The clamps popped on for me pretty easily and held tight, worked well, the system goes together pretty easily, like tinker toys kind of lol. I was suprised to not see any connectors in the package though, to connect two or three 30" poles together for length or height, but from watching videos it seems I'd need to just buy the 5' poles for that. But for my immediate purpose these were plenty tall enough (30"). It did take me a hot minute but I figured out how the c-clamps connected to each other, and I can see how this system is very adaptable, the parts durable, and storage space minimal.If I had found this system a few years ago, when I finally figured out that tomato cages were never going to work, I'd have probably bought several of the big sets. Compared to what I was looking at spending on other solutions this was a bargain, a good value for material that wasn't going to break down in a few years. But then I discovered cattle panels and that was a game changer, I have plenty of "trellis" and arches for everything now. However, I got these for some miniature cukes I was trying, a new bush variety that wasn't supposed to grow more than 18", but I still wanted to give them support and keep them off the ground. However, those buggers took off, I had a rebarb pole that I just hadn't put away yet leaning against one of the cattle panels near one of these bush plants and after two days of rain I came to my garden to find this bush cuke climbing the rebard to my metal trellis like a champ. Eventually all of them did once I gave them a way to get to the cattle panel. So I didn't need this system for them, not this year anyway.But I like the idea, I can use it when I need it where I need it. I think it will shine in small beds, I like that the system is green and blends in, let's the plants shine. I like the idea that these are cuttable and bendable, though I haven't tried that yet.This system is a nice solid option to have in my gardening toolbox.

This review is for Plant Support Maker Kit – Modular Trellis Building System with Short Stakes & Extra Clips – Compatible with Standard Garden Stakes – Build Custom Plant Supports for Indoor or Outdoor UseThis is a good quality kit, a good number of stakes and plenty of connectors to fashion all sorts of helpful structures for gardens. The stakes are good quality, and the connectors are easy to install yet hold tightly. Overall, I am happy with the kit, the connectors in particular, the stakes are a little short to have endless use scenarios, but they definitely have their uses.

Al cien

These are great for plant support! What I love about them is that you can adjust the height and width to whatever your needs are. I used these for a bougainvillea plant that needed some support and items to “climb” on. Because of how it the pot is positioned in my garden, setting these up for her inside the pot was a no-brainer!They fit together nicely, it does take a little effort to push them in place. And you need to make sure all the bites are facing the same way. It’s pretty self explanatory, and once you snap a couple bites and poles together, you’ll be a pro!The great thing about this product is the many ways it can be used. When my brother needed support for his tomatoes, I told him about these and he bought many sets and built a custom cage for them. He now has tomatoes as large as his hand with plenty of plant support for the weight.The poles and bites are extremely durable, they’ve been sitting in the FL sun for a long time and no degradation.If you need plant support, look no further! You can’t create and customize these however you want and you won’t be disappointed.